MAC Product Line
|
|
|
|
MAC Product Line |
|
| Racer's Choice Suspension | |||
 |
Control arms will help control your cars wheel hop, improving your launches. Handling is also improved by increasing body roll stiffness and sway bar performance. Heavy wall rectangular tubing, upper and lower arms with greasable polyurethane bushings, and CNC machined spring perches. All four control arms with hardware and bushings. Powder coat finish. |
Item # 27998 Upper & lower set of 4 |
Email me for special Pricing! (Include Item # as email subject!) |
| Racer's Choice Gauge Faces | |||
 |
White Gauge Faces Make your Mustang look like a Cobra! These are the best you can buy! A/C white face now available! |
Item # 2314
90-93 V-8 140 mph 90-93 Faces have green tint and come with provision for all indicator lights. |
Email me for special Pricing! (Include Item # as email subject!) |
| Racer's Choice Shifter | |||
 |
High performance
shifter for your T-5 with short shift and... |
Item # 20598 |
Email me for special Pricing! (Include Item # as email subject!) |
| Modular Throttle Body | |||
 |
On most manifolds! Dyno and Flow testing show this to be ideal for stock, modified and blown motors. We have seen 714 hp blower motor with 70mm throttle body! And 8.2 hp increase on a stock 5.0 with stock mass air with no other mods! |
Item # 3779 (Throttle Body) 86-93 5.0 Mustang |
Email me for special Pricing! (Include Item # as email subject!) |
| Pro-Dumps | |||
 |
Pro-Dumps
are excellent for lost clearance due to fuel cell, wide slicks, modified
chassis or suspension. System made of aluminized steel inside & out. Less
weight for the performance minded, also clears big driveshaft.. 3" inch
dumps come with 21ˇ2" reducers. Available in 21ˇ2" or 3" and installs in
minutes! Big 3" Pro-Dumps fit to stock Mustang or any MAC® intermediate
systems. |
PD2693
2.5" 79-95 5.0 Mustang PD8693 3" 79-95 5.0 Mustang PD2960 2.5" 96-00 2V/4V Not for 99-00 4V PD9600 3" 96-00 2V/4V Not for 99-00 4V Universal Pro-Dumps PD8340 2.5" Center In - Center Out PD8440 3" Center In - Center Out PD6330 2.5" Offset In - Center Out PD6430 3" Offset In - Center Out |
Email me for special Pricing! (Include Item # as email subject!) |
| Mac Pulleys | |||
 |
MAC pulleys are billet machined from high grade steel and black powder coated to resist corrosion. |
Item #4100 83-93 5.0 Mustang, Capri & Mark VII 69.50 83-90 Cougar & Thunderbird 88-95 F-series Trucks 302 & 351 #5495 94-95 5.0 Mustang 74.50 #4696 96 4.6 Mustang (Billet Aluminum Crank pulley) 99.50 #3898 94-98 3.8L V6 Mustang 79.50 This pulleys are designed to fit these years and will not fit 99-2000. |
Email me for special Pricing! (Include Item # as email subject!) |
| Cold Air Systems | |||
 |
This unit installs in minutes and uses existing air box locations on fender-well model. System comes chrome with all necessary hardware and stainless hose clamps. |
Item #3693 1989-93 MAF Fender-well Item #3393 1989-93 MAF Standard Mount |
Email me for special Pricing! (Include Item # as email subject!) |
| Short Tube Headers | |||
 |
All headers
below fit Stock, Dart, or GT-40 heads unless stated. Direct Replacement Equal Length 86-93 5028692 11ˇ2" HTS 86-93 I-0893 11ˇ2" Industrial Plated 86-93 9028690 1 5/8" HTS 94-95 902940 1 5/8" HTS 86-93 7028690 1 5/8" Uncoated 86-93 I-0286 1 5/8" Industrial Plated 94-95 702940 1 5/8" Uncoated 94-95 I-0294 1 5/8" Industrial Plated |
Direct Replacement Unequal Length |
Email me for special Pricing! (Include Item # as email subject!) |
 |
|
 |